Crown Audio DCI 4|2400N DriveCore Install 4-Channel 2400W Network Amplifier

System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the 4-channel Crown Audio DCI 4|2400N, a 2400W DriveCore Install BLU Link network amplifier with advanced features and flexibility.

SKU: DCI4X2400N-U-EUFX Brand:
Genuine and Original Product

Genuine Product with Warranty

You can also try the product at our shop located in Deira before you buy.

Contact Expert

Original price was: AED42,181.Current price is: AED29,527.

Out of stock

Out of stock

18 People watching this product now!
  • Pick up from Sound Town Store

Click here for the shop Location.


  • Express Delivery

For Dubai and Sharjah.

2-8 Hours

AED 50

  • Courier delivery

Deliver to your specified address.

2-3 Days

AED 15

  • Warranty 1 year
  • Free 30-Day returns

Payment Methods:


The amplifier also meets EN 54-16 compliance for life safety systems to serve the needs of hospitality, large venues, and other markets.

The 2 RU 4/2400N can produce up to 2400W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman’s BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.

Each channel pair can be bridged for powering higher power applications such as a subwoofer. The 4|2400N also has channel-independent, high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with a range from 0 to -80 dB.

The front panel of the 4|2400N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use.

Network Monitoring & Control

Monitoring, control and audio manipulation are provided with the HiQnet protocol that’s over standard TCP/IP. Remotely see how all networked DCi amplifiers are performing and control them as needed. In addition, this allows Audio Architect software and the Powered by Crown app to work with DCi amplifiers.

Programmable General Purpose Input/Output Ports

GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a master computer


DSP includes LevelMAX limiters, input/output EQ, delay, matrix mixer, and speaker line monitoring

Direct Drive Constant Voltage

You can use smaller-gauge wiring to drive the speakers using either 70/100 Vrms. With no need for a step-up transformer at the output, the DCi produces audio more efficiently

Channel-Independent Hi-Z/Low-Z Selection

Drive either one to four speakers in low-Z mode, or literally hundreds of speakers in hi-Z mode (70 Vrms or 100 Vrms). This means design flexibility since DCi powers all loads on a channel-by-channel basis

Bridgeable Channel Pairs

The DriveCore Install Series channels are bridgeable, even in 100 Vrms mode, allowing them to be used to for higher-power applications like subwoofers

Remote On/Off Interface

The amplifier can be integrated into a control system for remote on/off control

Efficient Cooling Design

Efficient internal cooling fans provide airflow to the most heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling while minimizing wasted energy and noise

Auto Standby

The amplifier automatically goes into sleep mode after 30 minutes of no input signal

TLC Protection

The amp has built-in protection from excessive heat by applying gain reduction when necessary

Advanced Protection Circuits

Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over- or under-voltage, and high-frequency overload
Crown Audio DCI 4|2400N DriveCore Install 4-Channel 2400W Network Amplifier
Crown Audio DCI 4|2400N DriveCore Install 4-Channel 2400W Network Amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP). For more exciting products at amazing price  switch to our store Sound Town Electronics




Customer Reviews

0 reviews

There are no reviews yet.

Be the first to review “Crown Audio DCI 4|2400N DriveCore Install 4-Channel 2400W Network Amplifier”

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5