QSC GX3 Power Amplifier

QSC GX3 425-watt Power Amplifier Features:

• QSC GX3 Power Amplifier is Power levels matched to the most popular speakers
• Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
• Inputs: XLR, 1/4″ TRS and phono input connectors for compatibility with any source
• Outputs: Speakon combo accepts, 1/4″ (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.
• Minimum depth chassis (10.1″ / 257 mm) fits in compact, inexpensive effects racks
• Lightweight – less than 30 lbs.
• Detented gain controls for precise setting and matching of sensitivity
• GuardRail automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
• Front panel LEDs monitor power, signal and clipping
• Subwoofer/Satellite crossover built-in
• Power at 4 ohms/1kHz (both channels driven): 425W
• Distortion (typical): 20Hz-20kHz, 1dB below rated power
• Dynamic headroom (4 ohms): 2dB
• Input impedance (ohms): reater than 20k (balanced)
• Maximum input level: +24 dB (16 Vrms)
• Input connectors (each channel):
  3-pin XLR and 1/4″ TRS, balanced, parallel
  Phono, unbalanced
• Output connectors (each channel)
  Speakon, 1/4″, binding posts
• Amplifier and load protection:
  Short circuit; open circuit; thermal; RF protection; load protected against DC faults
• Front-panel controls and indicators: Gain controls, 21 detents; red clip LEDs, proportional, 0.1% THD threshold; green signal LEDs, threshold -35dB; blue power LED, AC on
• Rear panel controls: Full range/crossover switch
  100Hz, 3rd order LP (sub), 2nd order HP (top)
• Dimensions” Height: 3.5″/2RU;
  width: 19″; depth: 10.1″
• Net weight: 27 lbs.

The QSC GX3 gives you the right wattage for your system!

Shop at: Audio shop Dubai