• Patented multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source.
• Exceptionally high output capability in a very compact form factor.
• May be operated as a bi-amplified or tri-amplified system. DSP settings are available on Q-SYS, SC-28, PLD amplifiers and CXD amplifiers.
• Dual 10-inch long-excursion, high-power, low-frequency transducers.
• Single 3-inch diaphragm neodymium compression driver.
• Birch ply enclosures. Available with standard finish in black.
• Fully captive hardware design incorporates all components necessary for box to box rigging.

A three transducer system that can be operated in either biamplified or triamplified modes, the WL2102-w features two 10″ low-frequency transducers and one 3″ driver. Both 10″ diameter LF transducers are used to cover the lowest frequency range. One driver covers only low frequencies while the range of the other extends through the mid frequencies to the mid/high crossover point. The use of a single midrange transducer allows the horizontal coverage pattern to remain as wide as possible and assures smooth response both on and off axis at the transition to the diffraction slot loaded high frequency section. Biamplification uses passive elements to affect the required frequency response shading of the low-frequency drivers and offers reduced amplifier channel counts and simplified wiring. Triamplification allows the required low-frequency shading to be controlled with greater precision via active electronics and is recommended where maximum output and highest sound quality are required.