fbpx
-2%

iRig Stomp I/O Your ultimate tone control rig. Ready to rock. Ready to record.

IK Multimedia
Availability:

Available on backorder


iRig Stomp I/O is designed to give guitarists, both electric and acoustic, bass players, vocalists, and songwriters a new way to have full control over their tone, in any situation.

Its versatility works wonders even on hardware synthesizers, for sonic combinations never heard before.

د.إ1,333.00 د.إ1,355.00

Prices go up when the timer hits zero. Additional Discount for Limited Period of Time – Please apply Coupon Code: BUYNOW at the Checkout.

Available on backorder

iRig Stomp I/O is a brand new type of USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone, iPad, Mac and PC.

It comes bundled with state-of-the-art guitar, vocal processing, and recording software for flexibility and usability, both live and in the studio.

The Neutrik® 1/4″ XLR combo jack accepts instruments and microphones including condenser mics with switchable 48V phantom power. The balanced stereo output connects to an external amp, mixer or PA, and a 1/4″ stereo headphone output is available for silent monitoring. The input gain and volume output knobs are easily accessible on the front panel, each with its dedicated LED VU-Meter indicator, for the quick-and-easy setting of levels.

iRig Stomp I/O boasts an elegant all-in-one design that perfectly highlights its flexibility and versatility. In a single piece of equipment, you now have everything you need to record in the studio, rehearse, or go out on stage and gig, without having to assemble a bulky and costly hardware setup.

With its high-quality 96kHz/24-bit audio interface, iRig Stomp I/O lets you easily record your guitar, bass or microphone – including studio condensers requiring 48VDC phantom power with true studio quality on iPhone/iPad, Mac and PC. The seamless integration with AmpliTube and VocaLive makes it as easy as plug-and-play to record on multiple devices using IK’s powerful, state of the art, 64-bit software. iRig Stomp I/O features a Class A preamp that can rival, if not surpass, the sound quality of floor processors costing up to three times as much.

Category: Brand:
Brand

IK Multimedia

Specs

iRig Stomp I/O Specifications

Common

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power: USB bus powered (when used with a computer) or DC IN
  • Device Connection: USB B-Type and Mini-DIN
  • Enclosure: metal sheet

Microphone Input

  • Connector: balanced female 3-pin XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: approx 2 kOhms
  • Gain Range: approx 48 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

  • Connector: unbalanced, Hi-Z, TS 1/4″ Jack. Tip: signal / Shield: ground
  • Instrument Input Level: from 30mVpp to 6.9Vpp
  • Instrument Input Impedance: 1MOhms
  • Gain Range: approx 27dB
  • Frequency response: 20 Hz – 20kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

  • Connector: 1/8″ TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level control: numbered thumbwheel
  • Headphone Output Power: 100mW into 50Ohms

Stereo Line Output

  • Connector: 2x balanced female 1/4″ TRS Jack. Tip: hot / Ring: cold / Shield: ground
  • Maximum Output Level: +16 dBu into 600 Ohms balanced load
  • Output Impedance: 150 Ohms balanced
  • Floating Balanced Outputs

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “iRig Stomp I/O Your ultimate tone control rig. Ready to rock. Ready to record.”

There are no reviews yet.